4-Input 4K60 DSC HDBaseT Switcher with USB

SKU: SW-740-TX

Utilizing the best in HDBaseT technology, the SW-740-TX harnesses the power of the Class C specification to deliver 5-play functionality over 100m/328ft of Cat6 cable. 4K/UHD video, Ethernet, Control & Power (PoH) can be sent to a remote display location via a compatible receiver whilst USB2.0 device data can be fed back via the USB host or USB-C ports to a connected source. The SW-740-TX has 4 switchable source inputs: 2 HDMIs supporting 18Gbps video up to 2160p 8-bit RGB/4:4:4 thanks to DSC compression, VGA, and USB-C supporting not only 4K/30 video, but device data from the connected receiver and device charging; the stereo audio input can be assigned to the VGA source or sent separately to the receiver.

• 2160P 4:4:4
  The two available HDMI inputs support full 4K 18Gbps bandwidth transmissions, making this presentation switcher ready for any source you connect. The USB-C input supports alt-mode, meaning that a single cable supports, 4K video transmission and two-way data communication.
• SCALING
  Featuring built-in scaling at the switcher, the HDMI and HDBaseT output will automatically scale depending on the connected screen’s capability. Connect a 4K screen to the HDBaseT output and use the HDMI output to connect a 1080p confidence monitor without affecting the source input.
• DEVICE CHARGING
  Through the available USB-C input, connect you device and forget the need to worry about your battery. The SW-740-TX supports up to an incredible 20V charging, so whether you plug in your smartphone or laptop, you’ll get charged while you present.
• HDBT
  Using the best of HDBaseT 2.0 technology, the SW-740-TX is a full 5 Play solution. With DSC technology, USB passthrough, ethernet, control and Power over HDBaseT, this switcher is the ultimate presentation solution.

Features

• Automatic or manual switching of 4 connected sources (VGA, 2 HDMI & USB-C) with assignable USB host connection
• Extended functions from USB-C port allow alt-mode for AV & USB host connectivity and device charging up to 3A over a single cable
• VESA recognized DSC compression technology enables extension of content up to 4K/60 8-bit to 100m/328ft
• Powerful output scaling matches video transmission to displays connected via HDBaseT & mirrored HDMI
• Includes input for separate analog audio device independent of HDMI signal for transmission to receiver
• PIR input allows automatic room triggering depending on occupancy
• USB-Type B Host connection for USB extension in KVM application when used with a compatible Class C HDBT receiver (RX-700 recommended)
• Intuitive Web UI for management, setup and maintenance with HTTPS encryption (Telnet over TLS and SSH available in future update)
• Automatic or manual CEC triggering of connected display through HDMI or HDBaseT output.

Specifications

AUDIO AND VIDEO

• Inputs:
  • 1x VGA In: 15-pin VGA
  • 1x USB-C
  • 2x HDMI In: 19-pin type A
  • 1x Audio In: 3.5mm (1/8in) TRS Stereo
• Outputs:
  • 1x HDMI Out: 19-pin type A
  • 1x Audio Out: 3.5mm (1/8in) TRS Stereo
  • 1x HDBT Out: 8-pin RJ-45 Female
• Output Video Encoding:    HDBaseT™ Class C
• Encoding Data Rate:    9.2Gbps
• End to End Latency:    10μs (micro seconds)
• Audio Formats:    2ch and multichannel LPCM

• 	Video Resolutions	HDMI	Cat6	Cat6a/7
  	1920x1080p @60Hz 8bit	15m/49ft	100m/328ft	100m/328ft
  Video Resolutions (Max)	1920x1080p @60Hz 16bit	15m/49ft	100m/328ft	100m/328ft
  	3840x2160p @60Hz 8bit 4:4:4	7m/23ft	100m/328ft	100m/328ft
  	4096x2160p @60Hz 8bit 4:4:4	3m/10ft	100m/328ft	100m/328ft

• Supported Standards:    DCI | RGB
• Maximum Pixel Clock:    600MHz

COMMUNICATION AND CONTROL

• HDMI:    HDMI | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
• HDBaseT™:    HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB | SERIAL
• RS-232:    1x 4-pin Phoenix (Control)
• Ethernet:    1x 8-pin RJ-45 female | Bidirectional over HDBaseT™
• IR:    1x 4-pin Phoenix (Pass-through)
• USB:   
  • 1x USB-C: USB 3.1
  • 1x USB Host: USB-B
  • Data Rate: 190Mbps
• CEC:    Auto, Manual Display Power through HDMI & HDBT Output
• OTHER:   
  • PIR Sensor: 1x 4-pin Phoenix
  • Contact Input: 1x 5-pin Phoenix
  • Tally Output: 1x 5-pin Phoenix

POWER

• Power Supply:    24V DC 6.66A
• Max Power Consumption:    Standard: 45W | With USB Charging: 110W
• USB-C:    Max. 20V charging (65W)

ENVIRONMENTAL

• Operating Temperature:    0 ~ +45°C (32 ~ +113°F), 10% ~ 90%, non-condensing
• Storage Temperature:    -20 ~ +70°C (32 ~ +113°F), 10% ~ 90%, non-condensing
• Maximum BTU:    Standard: 153.5 | With USB Charging: 375.3
• Rack Units | Wall Box:    <1U
• Height With | Without Feet:    30mm/1.18in
• Width With | Without Brackets:    240mm/9.44in
• Depth With | Without Handles:    200.2mm/7.88in
• Weight:    1.34Kg | 2.96lbs

REGULATORY

• Safety and Emission:    CE | FCC | RoHS | EAC | RCM