M-Vision Laser 21000 WU

21,000 Lumens Maintenance-Free Lumens with ColorBoost + Red Laser

• 21,000 ISO / 18,600 ANSI Lumens
• WUXGA Resolution
• 10,000:1 Dynamic Contrast

The M-Vision Laser 21000 is the first of a new breed of Single Chip DLP Laser projectors from Digital Projection. This lamp-free, laser-phosphor projector utilises new Colorboost+Red Laser technology to bring you the most realistic and saturated colours at previously unimaginable luminance levels. Such power and accuracy, combined with all-new intelligent processing brings the overall performance ever closer to that of a 3-Chip DLP projector – at a much more affordable price.

Boasting an unprecedented 21,000 lumens output and a 10,000:1 contrast ratio, the new M-Vision Laser 21000 brings budget-sensitive applications a large-screen imaging solution and near 3-Chip performance at a 1-Chip price point.

The optical system, from the laser light source up to the lens is completely sealed and can be considered IP60 rated. This ensures that light output and colour performance will not be degraded due to the ingress of dust. Additionally, this projector is completely filterless as the system is liquid cooled and uses a radiator heat exchanger, minimising maintenance as no replacement or cleaning of filters is necessary and allows unrestricted airflow.

Venues contending with ambient light, as well as applications needing a powerful yet budget-conscious large-format imagery solution without sacrificing on colour accuracy will directly benefit from the M-Vision 21000 class leading light output, contrast ratio and colourimetry. Perfectly suited to all applications where high brightness is required, no feature has been overlooked. DisplayPort accepts frame rates up to 60 Hz and HDMI 1.4b for Side by Side, Frame Packing & Top Bottom 3D formats. Motorised shift, zoom and focus across the whole lens range offers superb flexibility and ease of setup. This projector is not a class leader – it is in a class of it’s own

Specifications

• Colour System:  Blue + Red Laser and 4-segment colour wheel
• Display Type: 1 x 0.96" DarkChip™ DMD™
• DMD Specification: 1920 x 1200 pixels native, +/- 12° tilt angle Fast transit pixels for smooth greyscale and improved contrast.
• Aspect Ratio: 16x10
• Fill Factor: 87%

Key Features

Red Laser Assist

• Uses blue and red laser diodes for increased colour fidelity and highly accurate colours

Video & Graphics Processing

• HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & TopBottom 3D Formats.
• Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
• Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
• Synchronisation of active glasses.
• 3G-SDI with loop-through.
• 24p and 1080p native display.

Geometry Correction

• Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
• Blanking control for custom input window sizing.
• Scaling for fixed aspect ratio screens.

Edge Blending

• Correction for non-active pixels at the edge of the display.

Picture in Picture

• Two sources can be displayed either one within the other (PIP) , or side by side, with the original aspect ratios maintained.

HDBaseT® Interface

• Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
• Allows the projector to be placed up to 100m from source with low cost cabling.

Colour Processing

• Powerful seven-point colour correction for accurate colour matching.

Projector Controller Software

• Intuitive user interface for network control.
• Simultaneous control of user-defined groups of projectors.
• At-a-glance monitoring of projector status.

Projector Automation

• Real-time clock provides daily on/off automation.

Installation

• Integrated stacking mount pins.
• Eye bolts included for easy rigging.

Source Compatibility:

• 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
• HDMI including Deep Color™ processing.
• Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort.

Inputs/Outputs

Video & Computer			Communication & Control
Type	Connector	Qty	Type	Connector	Qty
DisplayPort 1.1a	DisplayPort	2	3D Sync Out	BNC	1
HDMI 1.4b	HDMI	2	3D Sync In	BNC	1
3G-SDI in	BNC	1	LAN	RJ45	1
3G-SDI out	BNC	1	RS232	9-pin D-Sub	1
HDBaseT	LAN RJ45	1	Wired Remote	3.5mm Stereo Jack	1
			12V Trigger	3.5mm Stereo Jack	2
			NOTE: The HDBaseT andLAN ports are not shared

3D Formats Supported 

• Frame Packing
• Dual Pipe
• Frame Sequential
• Side By Side (half)
• Top and Bottom

HDTV Formats Supported

• 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz)

Computer Compatibility

• Up to 1920 x 1200

Bandwidth

• 165 MHz on analog RGB
• 165 Megapixels per second on HDMI

Remote Control 

• Addressable IR Remote Control, wireless and wired
• On-Board keypad

Automation Control

• Crestron RoomView® Connected
• PJLink Class 1
• LAN
• RS232
• AMX (Device Discovery)
• Served web page

Colour Temperature

• 3200K to 9300K

Lamp Type 

• Laser Light Source 

Typical Lamp Life

• 20,000 hours

Lenses

Lens	Part No	Optimised Focus Range	Lens Shift
0.84 - 1.03 : 1 zoom	114-313	1.5m - 10m	Vert: 0.37 (U) 0.37 (D) frame, Hor: 0.12 (L) 0.12 (R) frame
1.20 - 1.56 : 1 zoom	117-573	1m - 8m	Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.50 - 2.00 : 1 zoom	118-578	2m - 12m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.00 - 4.00 : 1 zoom	118-588	2.5m - 42m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.00 - 7.00 : 1 zoom	117-463	4m - 42m	Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

Lens Mount

• Motorised and programmable shift, zoom and focus.

Mechanical Mounting

• Front/Rear Table
• Front/Rear Ceiling
• Adjustable Front/Rear Feet

Orientation

• Table Top or Inverted: Yes
• Pointing Up: Yes
• Pointing Down: Yes
• Roll (Portrait): Yes

Power Requirements 

• 110V~130Vac/ 50~60Hz
• 180V~240Vac/ 50~60Hz single phase * Note that in 120V operation, the projector will be at 65% brightness

Power Consumption

• Typical 1900W @ 240VAC in Normal mode
• Typical 1250W @ 110VAC in Normal mode

Thermal Dissipation 

• Typical 6482 BTU/Hour @ 220VAC in Normal mode
• Typical 4265 BTU/Hour @ 110VAC in Normal mode
• BTU/Hour

Fan Noise

• Normal mode: 49.6 dBA max, 42 dBA typical
• Eco mode: 47.6 dBA max, 39dBA typical

Operating/Storage Temperature 

• Operating: 0 to 35C (32 to 95F)
• Operating: >35 (95F) Projector automatically set to eco mode
• Storage: -20 to 60C (-4 to 140F)

Operating Humidity

• 10% to 90% relative, non-condensing

Weight (Chassis Only)

• 52 kg
• 115 lb

Dimensions

• L: 74.8cm W: 53.0cm H: 24.8cm
• L: 29.5in W: 20.9in H: 9.8in

Safety & EMC Regulations

• UL / cUL, CB, CCC, FCC Class 1, CE, BIS, RoHS 2, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 2

Accessories

• Infrared Remote (replacement) 117-780