NetworkHD™ 200 Series AV over IP H.264 MultiView Processor

NHD-250-RX
The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network.

The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.

4K OUTPUT
NetworkHD™ multiview decoders are the only NetworkHD 100/200 series product with a 4K output - capable of scaling a single 2K source to full 4K resolution or displaying multiple source images with no or minimal scaling on a 4K display.

MULTIVIEW MONITORING
The NHD-250-RX multiview processor is capable of displaying up to nine simultaneous video feeds on a single 4K display or 6 feeds in overlay mode on a 2K display, with users able to select between hybrid grid or PiP layouts among other configurations.

SERIAL AND HDMI DEVICE CONTROL
In addition to HDMI streaming over an IP Network, the 100/200 Series sends RS-232 control signals to a source or display and CEC control commands to a display device for single control signal deployment without the need for additional equipment.

• MultiView capable of displaying 1 to 9 simultaneous NetworkHD 2K encoder streams on a single 4K display
• Up to 6 simultaneous NetworkHD 2K encoder streams on a single 2K display in overlay mode
• Ideal for commercial monitoring of remote displays within a venue from a central location to quickly verify content transmitted to screens
• Multiple configurable layouts including hybrid grid layouts, PiP, PaP, arbitrary layouts and preset multiscreen arrangements
• Graphic or logo can be inserted into central image placeholder for screen indication or additional branding
• Configurable resolution output scaling, timing and mode
• Instant switching with WyreStorm QuickSync™
• RS-232 with integration with leading 3rd party control systems, including the NetworkHD Touch™ app
• CEC control of connected displays
• Analog audio breakout
• Configurable source audio switching
• Multiple NHD-250-RX units can be combined to suit the monitoring needs of the project
• Dramatically reduces the number of components required to monitor a venue – less decoders and screens – for reduced project complexity and less potential points of failure within installations
• Also provides video wall-like functionality on large screens or multiple screens combined with different layouts for custom display configurations
• Backwards compatible – able to be added to any existing NetworkHD 100/200 Series system
• IEEE 802.3af PoE compliant PD
• Includes DC power adapter and mounting bracket
• Compatible with NHD-000-RACK4 rack mounting kit

SPECIFICATIONS

• Audio and Video
• Inputs: 1x 8-pin RJ-45 (Transmission from TX)
• Outputs:
  • 1x HDMI Out: 19-pin HDMI Type A
  • 1x Audio Out: 3-pin Terminal Block (3.5mm)
• Audio Formats: 2ch LPCM 48KHz
• Input Video Decoding: H.264
• Decoding Data Rate: Max: 30Mb/s per stream
• End to End Latency (Max): ~80ms (low latency mode) | ~300ms (high quality mode)
• Video Resolutions (Max) Note: All resolutions listed are 8bit RGB or 4:4:4 8bit:
  • 3840x2160p @24/30/60Hz (Tile mode only)
  • 1920x1080p @24/25/30/50/60Hz
  • 1280x720p @30/50/60Hz
  • 720x576p @50Hz
  • 720x480p @60Hz
  • 60fps Progressive: 640x480 | 800x600 | 1024x768 | 12
  • 80x800 | 1280x1024 | 1360x768 | 1366x768 | 1400x1050 | 1440x900 | 1600x1200 | 1680x1050 | 1920x1200
• 3D: NA
• Maximum Pixel Clock: 594MHz

• HDMI: HDCP 1.4 | CEC
• Ethernet: 1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)
• RS-232: 2x RS-232: 4-pin Terminal Block (3.5mm) | 2 Way

• Power Supply: 12V DC
• PoE: IEEE 802.3af | (15.4W at PSE)
• Max Power Consumption: 8.3W (with PSU)

• Operating Temperature:
  • 32°F ~ 113°F (0°C ~ 45°C)
  • 10% ~ 90%, non-condensing
• StorageTemperature:
  • -4°F to ~ 158°F (-20°C ~ +70°C)
  • 10% ~ 90%, non-condensing
• Maximum BTU: 31 BTU/hr

• Rack Units/Wall Box: <1U flat on shelf | 6U in NHD-000-RACK4
• Height: 25mm/1in
• Width: 220mm/8.67in
• Depth: 130mm/5.12in
• Weight: 0.78kg/1.72lbs

• Safety and Emission CE | FCC | RCM | RoHS