Curtain Control Module

KASTA-C300IBH

Smart curtain control module that can be fitted behind a standard wall switch plate and connects to a momentary push button mechanism

Control AC powered motors (4-wire switched motor) or DC powered motors (Class I or Class II)
7-wire connection for power, motor and momentary switch mechanism
Reliable Bluetooth® mesh network connectivity to all KASTA devices
8-way multiway control
Short press on input S1 or S2 to fully OPEN or CLOSE, a second short press to STOP/PAUSE
Long press (S1, S2) >2s will initiate movement until released
Built in over-voltage and over-current protection, with maximum 30 second run time
Supports core KASTA functionality - control devices, groups, scenes, timers and scheduling
Suits all Australian standard wall plates using a momentary mechanism
iOS and Android app setup and control

Power Supply: 220-240V a.c. 50Hz
Operating Ambient Temperature: -20 to 40°C
IP Rating: IP20
Physical Connection Type: Terminals
Wiring Connections: Active, Neutral, Motor (Open/Close) & Momentary Mechanisms
Load Output (Inductive): Max. 300W (1.2A)
Load Compatibility:
- AC Motor: Standard bidirectional 4-wire 240VAC single phase motor with internal limit switches (2 Active, 1 Neutral, 1 Earth)
- DC Motor: Class I or Class II equipment only, up to 24VDC (max.) with internal limit switches
Momentary Input (S1/S2): Local signal input only (not 240V a.c.) Max. wiring length between S1/S2 and momentary mechanism is 10m
Housing Material: Polycarbonate (PC)
Standards Complied: AS/NZS 60669.2.1, AS/NZS 60669.1, AS/NZS 60950.1, AS/NZS CISPR 15, AS/NZS 4268

Brands	Kasta
Product type	Module

Kasta