WyreStorm Essentials™ 1080p HD UTP KVM Extender with USB 2.0 & PoC (1080p: 80m/262ft)

EXP-EX-80-KVM

The WyreStorm EXP-EX-80-KVM is a plug and play HDMI and KVM extender, capable of sending up to resolutions of 1080p@60Hz and HID (Human Interface Device) up to 80m (262ft) over a single CAT5e/6 cable.

Additionally, it supports bidirectional PoC (Power Over Cable) for powering at either the transmitter or the receiver with only one power adapter, making installations quick and effortless. Perfect use in office, home and presentation settings to extend HD video and USB keyboard and mouse from a local zone to a remote PC or laptop.

USB 2.0 PASSTHROUGH

The EXP-EX-80-KVM offers highspeed USB 2.0 pass-through, capable of not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities of 480Mbps for webcams or USB peripherals.

BI-DIRECTIONAL POC

With it's KVM extension, EXP-EX-KVM-80 includes bi-directional Power Over Cable abilities, saving the installer time and headache from having to supply local power discreetly to both ends.

HDCP COMPLIANT

WyreStorm extender solutions play nice with the equipment they’re connected to, ensuring that the HDCP encryption is maintained throughout the process.

DISCREET, SMALLER FOOTPRINT

As with all of WyreStorms Essentials line of extenders, we strive to give you the most functionality, while keeping the chassis size as minimal as possible, making it easier to keep discreet.

Features

• Full HD video resolution of up to 1080P@60Hz at up to 80m (262ft)
• Supports up to USB 2.0 data transfers bidirectionally up to 60m (197ft) and HID (Human Interface Devices) up to 80m (263ft)
• HDMI 1.3 and HDCP 1.4 Compliant.
• Bidirectional PoC - Powered at either the transmitter or receiver with only one power adapter.
• Slim 23mm chassis for discreet installation

SPECIFICATIONS

• Inputs
  • Transmitter:
  • 1x HDMI In: 19-pin type A
    1x USB Type B 
  • Receiver:
  • 1x UTP In: 8-pin RJ-45 Female
    2x USB Type A
• Outputs:
  • Transmitter:
  • 1x UTP Out: 8-pin RJ-45 female
  • Receiver:
  • 1x HDMI Out: 19-pin type A
• Output Video Encoding: UTP
• Encoding Data Rate: 6.75 Gbps
• End to End Latency Formats: 10μs (micro seconds)
• Audio Formats: 2ch PCM | Multichannel up to DTS-X and Dolby Atmos
• Video Resolutions (Max):
  • Video Resolution:1920x1080p @60Hz 12bit
  • HDMI: 15m/49ft
  • Cat6:80m/262ft
  • Cat6a/7: 80m/262ft
• Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference
• Supported Standards: DCI | RGB
• Maximum Pixel Clock: 225MHz

• HDMI: HDMI 1.3b | HDCP 1.4 | EDID | DVI/D supported with adapter (not included)
• UTP: HDMI 1.3b | HDCP 1.4 | EDID | 2-way PoC
• USB: 1x Type B (host) | 2x Type A (device) (Transmitter and Receiver) | Maximum uplink speed : 480Mbps | 60m/197ft Cat6,6a,7

• Power Supply: 12V DC 2A
• PoC: IEEE 802.3af 48V 15.4W Max | 2-way
• Max Power Consumption: 3.6W (per unit)

• Operating Temperature: 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing
• StorageTemperature: -4°F to ~ 158°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
• Maximum BTU: 12.28 BTU/hr

• Rack Units | Wall Box: <1U
• Height: 23mm/0.9in
• Width: 75mm/2.95in
• Depth: 98.2mm/3.87in
• Weight: 0.22Kg/0.48lb

• Safety and Emission: CE | FCC | RoHS | RCM | EAC