Vocal and instrument processors

Radial PROMS2 - Mic splitter, passive with 1-input, 2-direct outs & 1 Eclipse isolated output

Product Code: RA-PRO-MS2

Brand
Radial Engineering
RRP $349.00
*Recommended Retail Price may not be a true representation of the market price
 
Unit of Measure
EACH

 

3 Year
Features
UPC 6 761010 4082 7 Radial Part No. R800 1122

Technical Specifications
Brands Radial Engineering
Product type Audio Interfaces
Product type Splitters
  • Details
  • Downloads
  • Ordering

Passive 2-way Microphone Splitter

The ProMS2™ is a balanced mic-level splitter designed to send a signal to multiple destinations simultaneously on stage, with one transformer-isolated output and two direct outputs.

  • Send one microphone signal to three destinations simultaneously
  • Eclipse transformer for clean & transparent audio
  • Eliminates hum and buzz caused by ground loops
  • Single isolated output provides optimal noise rejection

Portable mic splitting for stage use

The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion. Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

ProMS2 Applications

Using the ProMS2 for a 2-way split

The Radial ProMS2 is the perfect interface for splitting a microphone to feed more than one mixer at the same time. 100% isolation eliminates potential ground loops between the two consoles for quiet performance while the main output provides a 48V phantom power return path to the mic.

Using the ProMS2 for a 3-way split

Sometimes, you need to feed the main mixer, stage monitors and a recorder at the same time. Connect the source mic to the ProMS2 XLR input, the direct out with phantom power return path to the main mixer, the direct out with ground lift to the monitor desk and the isolated out to the recording system.

Using the ProMS2 to compare two mic preamps

In the studio, it is often advantageous to compare the sound of two mic preamps on a particular voice, instrument or amplifier. The ProMS2 makes comparing preamps easy! Simply connect the mic to the ProMS2 and then split the signal to feed the two preamps and record with the one that sounds best!

Videos

  • Peter Janis explains the ProMS2 Passive Microphone splitter

ORDERING FROM AMBER TECHNOLOGY

NEW TO AMBER TECHNOLOGY?

You can place an order using guest checkout, and we'll email your order details when we ship. You can register by following this link. When you register, we will retain your order history and checkout information for future transactions. Registration is quick and free. We'll never share your registration details outside Amber Technology.

ARE YOU AN AMBER TECHNOLOGY ACCOUNT CUSTOMER?

Existing Amber Dealers can register for a web login using this link: Apply
Non account holders looking to become a dealer should use this link to apply: New Amber Dealer Application
If you don't know or have forgotten your password, please reset it using this link: Forgot Password
If you need help with any login or site-related issues, please Contact Us
Your user ID is the email address that's recorded for your account.

ORDER PROCESSING

Orders placed though the Amber Technology website are despatched from our Auckland warehouse.

    • Orders received before 12:00 PM (midday) will be processed for same-day shipping.
    • Orders received after after 12:00 PM will be processed for shipping on the following business day.
We ship using Mainfreight & Bascik for Screens and NZ Post for all other orders. We deliver New Zealand-wide to residential, business but do not ship to PO box addresses.

FREIGHT CHARGES

Standard Orders:

    • Orders valued over $250 ex GST: Freight-Free (excluding bulky or palletised items)
    • Orders valued under $250 ex GST: Flat shipping fee of $20.00 ex GST applies

Dropship Orders:

    • An additional $20.00 ex GST fee applies for all drop ship orders

Bulky Items, Fragile Freight & Palletised Orders:

    • Projection Screens: $30 per screen (nationwide)
    • Newline Displays: $150 per panel (nationwide)
    • Primacoustic Products: $30 per order (nationwide)
    • Palletised Orders: $30 per pallet (nationwide)
    • Special Requests or Priority Shipping: Additional $50 surcharge (ex GST)

Note: For all bulky, fragile & palletised orders, please include the following information when placing your order, failure to do so may result in a redelivery fee:

    • Name: of the person receiving the order
    • Email address: for the contact receiving the shipment
    • Phone number: of the contact receiving the shipment

ESTIMATED SHIPPING TIMES

    • Auckland (Metro): Next-day delivery (excluding rural areas)
    • North Island: 2-3 business days (excluding rural areas)
    • South Island: 3-5 business days (excluding rural areas)
    • Special Requests/Priority Services: Additional $50 surcharge (excluding GST)

Bulky Items & Palletised Orders: (Screens, Primacoustic, Bulk Shipping)

    • Auckland (Metro): Next-day delivery (allow up to 2 days)
    • North Island: 2-3 business days
    • South Island: 3-5 business days (depending on location)

Displays & Sensitive Freight: (Newline panels & large fragile items)

    • Auckland (Metro): 2 business days (allow up to 5 days)
    • North Island: 4-5 business days
    • South Island: 3-5 business days (depending on location)

IMPORTANT NOTES

    • Delivery times are estimates and may vary depending on courier schedules, remote locations, and public holidays
    • Rural areas may experience longer delivery times
    • Special requests, priority handling, or additional services will incur an extra $50 ex GST surcharge
    • Amber Technology reserves the right to alter freight charges at any time in response to changing market conditions or circumstances Amber deems to be exceptional

TRACKING

We will email the tracking number for your shipment shortly after it’s been despatched. If you have any questions regarding shipping, please Contact Us.

WARRANTY

Our goods come with guarantees that cannot be excluded under the New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. All items purchased from Amber Technology will be covered under warranty. The duration and terms of this warranty are specified by the manufacturer unless otherwise stated. Warranty information is available on the individual product listings on this site. Refurbished items will include a 12-month warranty unless otherwise stated. For warranty repairs for all brands, please download our Service Form and email to service@amber.co.nz. An RMA number will be issued for the repairs to commence. Do not send stock before receiving an RMA number. Further instructions will be emailed to you following receipt of the form.

STOCK AVAILABILITY

The availability of stock is communicated via the indicator of each product listing page.

    • Available - means that reasonable stock is in our warehouse, ready for immediate shipment.
    • Limited Stock - means that we have only a small number of items in stock.
    • Out of Stock - means this item is currently unavailable for immediate shipment - orders placed for "Out of Stock" items will be fulfilled as soon as replacement stock arrives.
    • Special Order – These products are not generally kept in stock in New Zealand. Lead times vary depending on country of origin, manufacturer stock levels, factory production schedules, and/or incoming shipment transit times. Please contact us for an estimated lead time.
    • In Stock at Supplier - This status indicates the item is not currently in our New Zealand warehouse, but is available from our Australian supplier. This means the product can be sourced and delivered faster than a standard 'Out of Stock' item. The ETA will generally be shorter, making it a viable alternative to waiting for restock from international suppliers.

TECHNICAL SUPPORT

Please visit the Contact Us page to find out how to get technical support for your product.

RETURNS

Please Contact Us if you have received an item which has been damaged in transit or is otherwise not working correctly when you receive it. Subject to availability, we will arrange for a replacement item to be despatched and for the faulty item to be returned to us.