Renkus Heinz

3-Way 15 Powered+Dsp P3-15-RN Renkus Heinz

Product Code: RH-P3-15-RN

Brand
Renkus Heinz
RRP $21,700.00
 
 
Unit of Measure
EACH

 

5 Year
Technical Specifications
Brands Renkus Heinz
Series P Series
Size 15"
Speaker Type Stage / Stadium
  • Details
  • Downloads

P3-15-RN

The P3-12 offers the sonic and performance advantages of a three-way loudspeaker in a cabinet the size of most two-ways. The CoEntrant CDT3 mid-high driver allows the use of a single, optimally sized Complex Conic horn. Not only does this insure consistent directivity through crossover, but also allows the horn to be ideally sized for consistent directivity through the low-mid crossover as well. Only Renkus-Heinz can combine this level of performance, fidelity and power in such a compact, easy to install or transport, loudspeaker.

Technical Data

  • Frequency Response: 55 Hz. to 20 kHz. (+ or - 3 dB)
  • Sensitivity: 1.0 volt for rated output, analog
  • Maximum Peak SPL: 133 dB-SPL@1 watt/1 meter
  • Dispersion: 60 h x 40 v (Optional 90 h x 40 v)
  • Crossover Frequency: 480 Hz & 2.5 kHz active electronic
  • Enclosure: 3/4 in./19 mm Lite Ply plywood
  • Grille: 16 GA powder coated, plated steel
  • Finish: Black (RAL9010) or White (RAL9011) paint, standard. Custom colors optional.
  • Weight: 69 lbs/31.2 kg
  • Dimensions: 445 mm w x 724 mm h x 479 mm d

SA2000 Amplifier Specifications

  • Audio Connections: 2 x XLR-3, In & Loop-out, Analog and AES
  • Network Connections: 2 x RJ45, Looping Ethernet/RHAON
  • Max Input Level: +22 dBu, Analog, 0 dBFS digital
  • User DSP: Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
  • Software: RHAON II
  • Latency: 6.25 ms
  • Power Output: LF= 1000 watts, @ 8 ohms / MF = 500 watts @ 4 ohms, HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on all channels protects the drivers.
  • Mains Voltage: 100-240 volts, 50/60 Hz auto-switching
  • Power Consumption: Idle: 400 mW. 1/8 power: 480 W (onset of limiting) 1/3 power: 1100 W (hard limiting)
  • Power Connector: Neutrik powerCON TRUE-1
  • Temperature Limits: Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.

Product Documents