DPA Microphones

This is a Special Order Item

DPA d:dicate™4018FJS Supercardioid Mic, Single 75 cm Boom, Floor Stand

Product Code: DP-4018-DF-F-B01-075

Brand
DPA Microphones
RRP $4,639.00
 
 
Unit of Measure
EACH

 

5 Year
Technical Specifications
Brands DPA Microphones
  • Details
  • Downloads

Elegant and exclusive design

  • Low noise and natural voice
  • Highly directional for high isolation
  • Uniform, frequency independent directionality
  • Exclusive, elegant design
  • Integrated shock-mounting in floor base
  • Rapidly stabilizing microphone boom pole
  • Modular flexibility (d:dicate™ capsules)

A complete cardioid microphone floor stand solution in the modular d:sign™ Microphone Series offering a high-quality stage voice or instrument mic.

SPECIFICATIONS

  • Directional pattern:    Supercardioid
  • Principle of operation:    Pressure Gradient
  • Cartridge Type:    Pre-polarized condenser
  • Frequency range:    20 Hz to 20 kHz
  • Frequency range, ± 2 dB:    40 Hz to 18 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz:    12 mV/Pa; -38 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted:    Typ. 16 dB(A) re. 20 µPa (max. 19 dB(A))
  • Equivalent noise level, ITU-R BS.468-4:    -
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):    Typ. 78 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz:    < 1 % up to 137 dB SPL peak
  • Minimum load impedance:    2 kohm
  • Dynamic range:    Typ. 121dB
  • Max. SPL, peak before clipping:    142dB
  • Output impedance:    100 ohm
  • Cable drive capability:    100 m (328 ft)
  • Output balance principle:    Impedance balancing
  • Common Mode Rejection Ratio (CMRR):    > 40 dB
  • Power supply (for full specifications):    48 V Phantom power (± 4 V)
  • Current consumption:    3.5 mA
  • Color:    Matte black
  • Weight:    -
  • Microphone Diameter:    19 mm (0.75 in)
  • Capsule diameter:    19 mm (0.75 in)
  • Output voltage, RMS:    2.2V
  • Microphone Length:    -
  • Polarity:    +V at Pin 2 for positive sound pressure
  • Connector:    XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Relative Humidity (RH):    Up to 90%
  • Temperature range:    -40 °C to 45 °C (-40 °F to 113 °F)

Product Documents

No documents available