6x6 HDBaseT™ Matrix Switcher with HDMI Mirror Outputs, Bidirectional IR, and PoH (1080p: 70m/230ft)

MX-0606-PP-POH
Looking to reliably distribute up to six HD sources to up to six HD display zones over distance with flexibility of control and installation? Look no further than the MX-0606-PP-POH for medium-sized residential or light commercial applications of any kind.

A new addition to WyreStorm's PP-POH line of matrix solutions, the MX-0606-PP-POH features a rock solid HDBaseT Class B platform to support transmissions of 1080p@60Hz 36bit deep color video, multi-channel digital audio up to 7.1 and 2way IR control.

MIRRORED HDMI OUTPUTS
You will find that every transmission card has an added HDMI output, which mirrors it’s respective HDBaseT output, perfect for connection of additional local HDMI devices, such as an AVR or monitor. Additionally, this output can be further extended with our line of HOAC’s and extenders.

MORE OPTIONS
Each transmission card offers HDMI input, HDBaseT with PoH output, IR input, and control capabilities. Also, the PP-POH power house offers bidirectional IR, EDID management, as well as 3 methods of control, to connect to leading control systems.

POH READY
PoH enables power to be passed along the cable along with transmissions for receivers to operate without the need for local mains power at display zones for greater flexibility and convenience during installation as well as improved energy efficiency compared to a permanent mains connection.

Features

• 6x6 full HD Matrix Switcher
• Class B HDBaseT technology for one-cable transmissions of 36bit Deep Color Full 1080p HD video @60Hz, HD audio, bidirectional IR and serial control with low voltage Power-over-HDBaseT up to 70m/230ft
• Featuring 6x TX-PoH-010 HDBaseT Out, HDMI Out, HDMI In, IR In transmission cards
• Duplicate HDMI output to allow simultaneous connection of a second local ‘mirrored’ screen, AVR or extender product
• IR In allows control signals to be sent to the sink device
• Fully 3D compatible – Frame packing/sequential (Blu-Ray) and Interlaced Stereoscopic (satellite/cable broadcasts)
• PoH – power passed directly along Cat5e/6 cable up to 70m/230ft from the MX-0606-PP-POH matrix to all connected PoH-enabled display receivers so no additional power is required at display location
• Each output can be cascaded up to 7 times for even larger distributions spanning 56 displays covering a transmission distance of up to 3.9Km/ 2.4miles
• Modular design enables transmission cards to be quickly and easily replaced or upgraded with faster on-site changes than ever before
• HDCP compliant
• Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings if necessary
• The same robust transmission technology as full HDBaseT that is far more resistant to electrostatic interference than conventional distribution
• Fully compatible with all market leading third party control systems with full integration protocols available for AMX, Control 4, Crestron, Red Eye, Nevo, RTI, Control FX, Savant, Bit Wise, and more
• Wide range, two-way discrete IR control between source and display and vice versa (30 KHz to 56 KHz frequency)
• Choose from 5 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, and RS-232
• Simple switching remote control included, which can be learned into a universal remote handset to allow the control of multiple devices from one handset
• Conforms to IEEE-568B standards
• Compact 2U size
• Additional infrared extension port for longer IR connections
• Includes mounting brackets, IR receivers, IR transmitters and a remote control handset

SPECIFICATIONS

• Inputs: 6x HDMI 19-pin type A
• Outputs:
  • 6x HDMI 19-pin type A (Mirrors HDBaseT™)
  • 6x HDBaseT™ 8-pin RJ-45 female
• Audio Formats: 2ch PCM | Up to DTS-HD Master Audio and Dolby TrueHD
• Max. Video Resolution
  • HDMI: 1920x1080p @60Hz 36bit (15m/50ft)
  • Using Cat6/6a/7: 1920x1080 @60Hz 12bit (70m/230ft)
• Color Depth: 1080p: 12bit
• Maximum Pixel Clock: 225MHz

• HDMI: EDID | DVI/D supported with adapter (not included)
• HDBaseT™: EDID | PoH (1way) | Bidirectional IR and Ethernet
• Ethernet: 1x 8-pin RJ-45 female | Web UI | IP Control
• IR:
  • 1x IR Ext - 3.5mm (1/8in) Stereo | Matrix Control
  • 6x IR TX - 3.5mm (1/8in) Mono | Bidirectional over HDBaseT™
  • 6x IR RX - 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT™
• RS-232: Matrix Control | Firmware Updates

• Power Supply: 100~240V AC 50/60Hz
• PoH: 48V 15.4W (each HDBaseT output)
• Max Power Consumption: 125W

• Operating Temperature:
  • 32°F ~ 113°F (0°C ~ 45°C)
  • 10% ~ 90%, non-condensing
• StorageTemperature:
  • -4°F to ~ 158°F (-20°C ~ +70°C)
  • 10% ~ 90%, non-condensing
• Maximum BTU: 426.5 BTU/hr

• Rack Units/Wall Box: 2U
• Height With | Without Feet: 95.5mm/3.76in | 87.7mm/3.46in
• Width With | Without Brackets: 481mm/18.94in | 438mm/17.25in
• Depth With | Without Handle: 373.8mm/14.72in | 347.8mm/13.7in
• Weight: 6.7kg/14.74lbs

• Safety and Emission CE