WyreStorm Essentials™ 18Gbps 4K HDR UTP Extender Set

with PoC & IR Passthrough (4K: 35m/115ft, 1080p: 50m/164ft)

EXP-EX-35-G2

18Gbps transmission rates are no longer reserved for just the ProAV extenders! Now featured in the EXP-EX-35-G2 you get the robust bandwidth capabilities in a smaller, cost effective form. IR for source control and PoC all wrapped up in a compact chassis for unbeatable value, reliability and ease of installation.

HDMI2.0 MAXED OUT
Knowing the speed at which technology moves, at WyreStorm we’re always looking ahead. That’s why we’ve implemented our VLC chipset (Visually Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 60Hz HDR and 4:4:4 60Hz.

HDCP 2.2 COMPLIANT
The latest 4K HDR content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the evolving family of extenders, the EXP-EX-35-G2 supports the multi-point distribution of this content over a single category cable.

FEATURE RICH; UNBEATABLE VALUE
With features such as PoC, automatic EDID, VLC and IR source control, the EXP-EX-35-G2 brings a tremendous amount of features to any simple installation at a cost effective price.

FLEXIBLE INSTALL OPTIONS WITH 2-WAY POC

No two installs are the same; that’s why we’ve enabled our EXP-EX-35-G2 extender to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.

Features

• Transmits 4K@60Hz HDMI content over UTP to 35m (115ft) or 1080p@60Hz to 50m (164ft)
• VLC technology making 18Gbps over 10.2 cable possible for perfect visually lossless video
• PoC means receiver is powered via a single PSU at the transmitter
• IR pass-through RX > TX for source control
• Slim 15mm chassis for discreet installation

Specifications

Audio and Video

• Output Video Encoding: UTP
• Encoding Data Rate: 9.2Gbps
• End to End Latency Formats: 10μs (micro seconds)
• Audio Formats: 2ch PCM | Multichannel up to DTS-X and Dolby Atmos

Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference

• Supported Standards: DCI | RGB | HLG | HDR-10 (Dolby Vision not supported)
• Maximum Pixel Clock: HDMI: 600MHz | UTP: 297MHz

• HDMI: HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
• UTP: HDMI | HDCP 2.2 | EDID | 2-way PoC | IR Source Control
• IR: 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo

• Power Supply: 12V DC 1A
• PoC: IEEE 802.3af 48V 15.4W Max | 2-way
• Max Power Consumption: 6.48W (Pair, PoC)

• Operating Temperature: 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing
• StorageTemperature: -4°F to ~ 158°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
• Maximum BTU: 22.11 BTU/hr

• Rack Units | Wall Box: <1U
• Height: 15.2mm/0.6in
• Width: 70mm/2.75in
• Depth: 90mm/3.54in
• Weight: 0.15Kg/0.33lb

• Safety and Emission: CE | FCC | RoHS | RCM | EAC