32Gbps 8K 60Hz DisplayPort 1.4 Active Optical Cable with DP++ Support (10m/32ft) CPR, CL3 Approvals

CAB-DAOC-10-C

Bringing the wealth of knowledge that WyreStorm has accumulated in hybrid HDMI cables, the DAOC brings the same powerful benefits to DisplayPort system topology. Connecting to PC graphics cards or high performance media playback systems, the DAOC is ready for content up to 8K/60 at 8-bit 4:4:4 plus support for HDR-10. The WyreStorm DAOC can extend super high-bandwidth video with up to 32 channels of PCM audio up to 10m/33ft using the very latest in active optical transmission technology.

OPTICAL TRANSMISSION
Adopting a powerful 4-core transmission system, the passive optical conversion within the WyreStorm DAOC cables is compatible with new content, meeting the current DP1.4 standard. With each core rated at 8.1Gbps, the combined bandwidth means that the DAOC will support current & future content up to 32.4Gbps, equating to 8K/60 4:4:4 using peer-to-peer DSC.

ALREADY READY FOR 8K
The next big thing in video timings, although seldom seen in consumer electronics, is an established format in the professional display & signage markets. The WyreStorm DAOC cables are compatible with content running at 8K (7680 x 4320) 30Hz natively or 8K 60Hz utilizing DSC (Display Stream Compression). HDR10 content is also supported between compatible devices.

DSC COMPATIBLE
Usually adopted for use in powerful HDBaseT Extenders such as WyreStorm’s EX-100-H2-PRO, the VESA approved Display Stream Compression technology is now being used in native HDMI connections for the first time. The aim is to send super-high bandwidth content at a lower transmission data-rate using this mathematically lossless compression algorithm; the WyreStorm FRL HAOC cables are compatible with this technology and will safely pass the signal from source to display.

PASSIVE COMMUNICATION
It’s not all about raw bandwidth and transmission power, DisplayPort technology works by sending huge amounts of invisible “metadata” in both directions and it’s this information that makes or breaks a viewing experience. WyreStorm Active Optical Cables have been verified to not only ensure that the A/V signal gets to its destination but also the invisible metadata too. CEC, EDID and HDCP are all supported by WyreStorm DAOC cables

Features

• Uncompressed optical transmission of DisplayPort content up to 32.4Gbps:
• 1920 x 1080p @240Hz
• 2560 x 1440p @240Hz
• 3840 x 2160p @120Hz
• 5120 x 2880p @60Hz
• 7680 x 4320p @60Hz
• (all quoted at RGB 8-bit)
• Compatible with static HDR and HDR-10 standards.
• Supports transmissions using DSC (Display Stream Compression) between source and display
• Ready for HDCP 2.2 content encryption
• True native HDMI communication ensures CEC and EDID communication between compatible devices
• Perfect for use in environments with excessive EM or RF interference
• Kevlar protected communication cores
• High quality aluminum construction with low-profile 21mm/0.82” TX head
• Supplied coiled on cardboard spool in box, with RX head out first.
• No single use plastic included* #SUPFree

Specifications

• Transmission Encoding: Uncompressed AOC
• End to End Latency: 10µs
• Maximum Transmission Bit Rate: 24 Gbps (4-core, 6Gbps per lane)

• HDMI:
  • (v1.4) LVDS | 8b/10b encoding
  • DCS v1.2 (Display Stream Compression) Supported
• Input: 1x DisplayPort: 20-pin Male
• Output: 1x DisplayPort: 20-pin Male
• Maximum Data Rate: 25.92 Gbps
• Supported Standards: DCI | Static HDR | HDR10+

• Audio Formats: 24-bit PCM
• Maximum Sampling Rate: 192KHz
• Maximum Audio Channels: 32

• HDCP: Pass-Through, 2.2 Supported
• EDID: Pass-Through, RX > TX
• Consumer Electronics Control (CEC): Bidirectional Supported

• Max Bend Radius: 2cm
• Max Pull Tension: 15kg/33lbs
• Orientation: Uni-directional - Observe signal flow direction prior to installation

• Power Supply: Passive 3.3v~5.5v VCC (From Connected Source)
• Max Power Consumption: 250mW

• Operating Temperature: 14°F ~ 122°F (-10°C ~ 50°C) | 10% ~ 90%, non-condensing
• Storage Temperature: -4°F to ~ 140°F (-20°C ~ +60°C) | 10% ~ 90%, non-condensing
• Maximum BTU: 0.85 BTU/hr
• Jacket Material:
  • CAB-DAOC-10-C: 10m/33ft
  • CAB-DAOC-10-P: 10m/33ft

• Safety and Emission:
  • CAB-HAOC-xx-C: CE | FCC | RoHS | CPR | LSVH | EAC
  • CAB-HAOC-xx-P: CE | FCC | RoHS | Plenum UL | EAC