1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder

NHD-110-RX

The NHD-110-RX is the AV decoder to the powerful 110 series of NetworkHD AV over IP components. The NetworkHD 110 series takes the award-winning 100 series and elevates to a new level. The 110 series components support both H.264 and H.265 video encoding/decoding. With H.265, video transmissions look better than ever and use up to 6x less bandwidth. AV streams are fully secure over the network using AES 128-bit encryption methods, ensuring any sensitive data cannot be maliciously accessed. Of course, the series would not be complete without retaining the powerful video wall and Multiview processing found in the 100/200 series. The 110 series does one better by eliminating the need for a dedicated video wall processing decoder as the standard NHD-110-RX natively has this ability. Last but not least, the 100, 110 and 200 series components are interoperable, making retrofit installs a breeze and maintains compatibility with the NHD-250-RX for Multiview.

VIDEO WALL
Capable of processing up to a 16x16 video wall. Easily design video walls using the intuitive NetworkHD console software that’s part of the WyreStorm Management Suite. Adjust for bezel and gaps between displays and even create captivating mosaic configurations!

FLEXIBLE CONTROL
Choose your flavor, the NHD-110-RX can control displays or other peripheral equipment via IR, RS232, or CEC. No matter the device you have, NetworkHD has a method to control it. All control signals are fully routable and customizable through the entire system.

VIDEO SCALING
Each NHD-110-RX features a powerful video scaler. These scalers can operate automatically or be forced to transmit a specific video timing and format. Having scalers ensure you will always have a video signal no matter the display you connect to. Not to mention, the amazing seamless video switching capability.

DISCRETE ROUTING
Every signal that passes through a NetworkHD 110 system can be discretely routed. This includes video, audio, IR, RS232, USB, and CEC. NetworkHD provides the most flexibility possible and can be perfectly tailored to your application requirements.

FEATURES

• Supports up to 1080p @ 60Hz video content
• Support all SD and HD formats - including interlaced content
• Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
• Interoperable with NHD-100-TX and NHD-140-TX
• Analog audio de-embed for easy connection to external audio DSP or amplifier
• Image scaling - use mixed resolution displays throughout an installation
• Seamless video switching – no black screens or freeze frames
• Hugely scalable I/O, utilizing multicast technology
• Zero-configuration switch setup using unicast technology
• Flexible IP address settings: AutoIP/Static/DHCP
• Customizable CEC, IR or RS-232 control of connected devices
• Up to 16x16 video walls with image scaling, bezel compensation and rotation
• Custom “No Source” idle image upload for branded down time
• Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
• Infrared signal generation via API – supports Hex Global Cache format
• Batch firmware update and batch settings functions offers a massive reduction on installation times
• HDCP 1.4 compliant
• IEEE 802.3af PoE compliant PD
• Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

SPECIFICATIONS

• Inputs: 1x 8-pin RJ-45 female | 10/100Base-T
• Outputs:
  • 1 x HDMI 19-pin HDMI type A
  • 1 x 3-pin Phoenix Analog Audio
  • Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.
• Audio Formats: LPCM/MPEG4 AAC stereo, 48KHz
• Video Encoding: Primary Stream - H.264/H.265, configurable up to 30Mbps
• Video Resolutions (Max):
  • HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
  • Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
• End to End Latency:
  • High Quality Mode: ~250ms
  • Low Latency Mode: ~80ms
• Maximum Pixel Clock: 165MHz

• HDMI: HDCP 1.4 | EDID | CEC (configurable)
• RS-232: 1 x 3-Pin Phoenix – API controlled from NHD-000-CTL
• LAN: 1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
• IR:
  • 1x IR TX: 3.5mm TS Jack Socket
  • 1x IR RX: 3.5mm TS Jack Socket
  • IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable
  • IR to discrete TX/RX devices
• USB:
  • 2 x Type ADevice Ports
  • USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

• Power Supply: PoE | 12V 1A DC
• Max Power Consumption: 6W (DC adapter)

• Operating Temperature:
  • 32°F ~ 113°F (0°C ~ 45°C)
  • 10% ~ 90%, non-condensing
• StorageTemperature:
  • -4°F to ~ 158°F (-20°C ~ +70°C)
  • 10% ~ 90%, non-condensing
• Maximum BTU

• Rack Units/Wall Box
• Height: 1"
• Width: 6.875"
• Depth: 3.875"
• Weight: 1.1lbs

• Safety and Emission: CE | FCC | RoHS | RCM | EAC