AV switching and distribution

Hdbaset Rx 4K:70M 1080P 100M RXV704KARC Wyrestorm

Product Code: WY-RXV704KARC

Brand
Wyrestorm
RRP $1,319.00
 
 
Unit of Measure
EACH

 

5 Year
Technical Specifications
Brands WyreStorm
Input/output type HDBaseT
Input/output type HDMI
Product type Extenders
  • Details
  • Downloads

4K HDR HDMI-Over-HDBaseT™ Receiver with ARC & Audio Return (2160p 4:4:4/60: 70m/230ft | 1080p: 100m/328ft)

RXV-70-4K-ARC

With high-framerate HDR-10 and HLG technology exceeding the capabilities of HDBaseT, WyreStorm has implemented light-compression technology. The RXV-70-4K-ARC forms part of this new generation of signal extension technology and furthermore, frees the 5.1 audio from an ARC compatible TV and sends back to an H2XC matrix over HDBaseT; an optical S/PDIF input is also present for sending digital audio signals.

AUDIO RETURN TECHNOLOGY
The RXV-70-4K-ARC can transmit multi-channel digital audio from the TV location back to the matrix device for onward connection to an AVR or multi-room amplifier.

HDMI & OPTICAL AUDIO RETURN OPTIONS
Audio Return is selectable between HDMI or S/PDIF optical input which allows for audio from a TV without ARC support to send audio to the transmitter or matrix.

HDMI VIDEO MAXED OUT!
Always looking ahead, WyreStorm can handle both current & future video content technologies. The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can still be sent using HDBaseT and the latest in lossless compression technology from the matrix to this device.

CLASS A HDBASET
Receives HDBT transmissions of 4K up to 70m/230ft and 1080p up to 100m/328ft with multi-channel audio, control, ethernet and PoH also supported



FEATURES

  • Uses WyreStorm's proprietary compression technology for lossless transmission of 4K HDR content, without latency
  • Supports ARC via HDMI or optical input for audio return over HDBaseT
  • Selector switch for ARC (via HDMI) or Optical Return via Toslink
  • Reliable HDBaseT-HDMI conversion over distance using single Cat6 cable
  • 4K HDR signals up to 70m/230ft (2160p 4:4:4 60Hz 8-bit) and 2K signals up to 140m/459ft (1200p 60Hz)
  • Supports HDMI2.0 video standard up to 18Gbps
  • Compatible with HDR standards including HDR-10, HDR-10+, HLG and Dolby Vision™ (Dolby Vision supported up to 30Hz)
  • Class A HDBaseT supporting the transmission of video, multichannel audio, Ethernet, bidirectional control and PoH
  • Powered remotely via PoH from H2XC matrix
  • Bidirectional IR supported with both IR TX & RX ports
  • RS-232 port for routed 2-way serial communication
  • Supports Ethernet pass-through from matrix (Class A HDBaseT transmission only)
  • LED indication for HDCP presence within signal and transmission link between devices
  • Ventilated steel chassis
  • HDCP 2.2 compatible
  • Compact design for convenient and unobtrusive installation
  • Wall mounting brackets and IR accessories included

SPECIFICATIONS

Audio and Video
  • Inputs:
    • 1x HDBaseT™ In: 8-pin RJ-45 Female
    • 1x S/PDIF In: TOSLINK (Digital Optical)
  • Outputs: 1x HDMI Out: 19-pin type A
  • Output Video Encoding: HDBaseT™ Class A
  • Encoding Data Rate: 10Gbps
  • End to End Latency: 10μs (micro seconds)
  • Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
  • Video Resolutions (Max)Video ResolutionsHDMICat6Cat6a/7
    1920x1080p @60Hz 12bit15m/49ft100m/328ft100m/328ft
    3840x2160p @24Hz 10bit 4:2:0 HDR7m/23ft70m/230ft100m/328ft
    3840x2160p @30Hz 8bit 4:4:47m/23ft70m/230ft100m/328ft
    3840x2160p @60Hz 10bit 4:2:0 HDR5m/16ft70m/230ft100m/328ft
    3840x2160p @60Hz 10bit 4:2:0 HDR3m/10ft70m/230ft100m/328ft
    4096x2160p @60Hz 8bit 4:2:07m/23ft70m/230ft100m/328ft
    4096x2160p @60Hz 8bit 4:4:43m/10ft70m/230ft100m/328ft
  • Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
  • Maximum Pixel Clock: HDMI: 600MHz | HDBaseT™: 297MHz
Communication and Control
  • HDMI: HDCP 2.2 | EDID | CEC | DVI-D supported with adapter (not included)
  • HDBaseT™: HDMI | HDCP 2.2 | EDID | CEC | 1-way PoH to Receiver | Bidirectional IR
  • CEC: Power Triggering from Matrix | Requires CEC compatibility at Display
  • IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT™
  • ARC (Audio Return Channel): Supports True ARC (via HDMI) or S/PDIF optical return from display to the matrix over HDBaseT™
  • RS-232: 1x RS-232: 3-pin Phoenix | Bidirectional over HDBaseT™
  • Ethernet: 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over HDBaseT™
Power
  • Power Supply: 18V DC (Optional)
  • PoH: 48V 15.4W
  • Max Power Consumption: 12.5W
Environmental
  • Operating Temperature: 0°C to 45°C (32°F to 113°F)
  • StorageTemperature: -20°C to 70°C (-4°F to 158°F)
  • Maximum BTU: 43BTU/hr
Dimensions and Weight
  • Rack Units: <1U
  • Height With: 21mm/0.83in
  • Width With: 195mm/7.68in
  • Depth With: 94.8mm/3.74in
  • Weight: 0.4kg/0.88lbs
Regulatory
  • Safety and Emission CE | FCC | RoHS | RCM

Product Documents

No documents available