HDBaseT Input, HDBaseT™ Output and Mirrored HDMI Output with Audio Input, DSP Output and IR to zone (4K: 70m/230ft | 1080p: 100m/328ft)

TX-H2X-HDBT

De-centralize sources connected to the H2X matrix platform with this HDBaseT input & output card. Accepting 4K UHD transmissions from 70m/230ft, this modular card allows source devices to be kept in-suit while making them part of the main distribution system.

CLASS A HDBASET™
Both the input and output side of this card offers HDBaseT™ 5-Play connectivity, passing AV, Control, Ethernet and PoH for both the RX and TX devices.

THE WYRESTORM ECO-SYSTEM
Used in line with WyreStorm's range of HDBaseT™ devices, signals can be sent from single transmitters, switching transmitters or even presentation switchers to create a multi-layered switching environment.

AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.

4K UHD WITH HDR OVER HDBASET™
Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft.

Features

• HDBaseT Input – enables the direct connection of a remote source to the matrix via an HDBaseT Transmitter only at the source location, rather than an HDBaseT extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source
• HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
• HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
• Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
• S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
• S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
• IR RX – allows control signals to be sent to the sink device

SPECIFICATIONS

• Inputs:
  • 1x HDMI In19-pin type A
  • 1x S/PDIF In Coaxial Digital
  • 1x HDBaseT™ 8-pin RJ-45 female
• Outputs:
  • 1x HDBaseT™ 8-pin RJ-45 female
  • 1x S/PDIF Out Coaxial Digital
  • 1x Audio Out 3pin Phoenix Connector
• Outputs Video Encoding: HDBaseT™ Class A
• Encoding Data Rate: 9.2Gbps
• End to End Latency: 10μs (micro seconds)
• Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

• Video Resolutions (Max)	Video Resolutions	HDMI	Cat6	Cat6a/7
  	1920x1080p @60Hz 12bit	15m/49ft	100m/328ft	100m/328ft
  	1920x1080p @60Hz 16bit	7m/23ft	70m/230ft	100m/328ft
  	3840x2160p @24Hz 10bit 4:2:0 HDR	3m/10ft	70m/230ft	100m/328ft
  	3840x2160p @30Hz 8bit 4:4:4	7m/23ft	70m/230ft	100m/328ft
  	3840x2160p @60Hz 10bit 4:2:0 HDR	3m/10ft	NA	NA
  	4096x2160p @60Hz 8bit 4:2:0	7m/23ft	70m/230ft	100m/328ft
  	4096x2160p @60Hz 8bit 4:4:4	7m/23ft	NA	NA

• Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
• Maximum Pixel Clock: HDMI: 600mHz | HDBaseT™: 297MHz

• HDMI:  HDCP 2.2 | DVI-D supported with adapter (not included)
• HDBaseT™: HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver
• IR: 1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™
• RS-232: Matrix Control | Bidirectional over HDBaseT™ | Firmware Updates
• Ethernet: From Matrix - No Connection on card | Bidirectional over HDBaseT™
• ARC (Audio Return Channel): Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT™ (Requires ARC or SCL Receiver)

• Power Supply: Internal to Matrix
• Max Power Consumption: Matrix Dependent
• PoH: 48V 15.4W

• Operating Temperature: Matrix Dependent
• StorageTemperature: Matrix Dependent
• Maximum BTU: Matrix Dependent

• Safety and Emission Matrix Dependent